TLV2352IPE4 Overview
A convenient transport package is provided in PDIP .The comparator has a TTL output.There are 8 terminals on the comparator.The electrical component in this case belongs to the Comparator families.A comparator is capable of completing a variety of demanding tasks when supplied with 3V voltage.As a result, it contains 8 pins.The comparator is equipped with 8 pins.There is a quiescent current of 400μA in this comparator.The PCB or other board has a Through Hole for mounting.Electronic comparator is recommended that the nominal supply current be 300μA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 300μA .In order to run the device, there are only 3/5V power supplies required.A maximum current of 5pA can be supplied to the device.An increase in temperature over 85°C is not recommended.Comparator electronics cannot be operated at a temperature lower than -40°C .In the comparator, the maximum supply voltage is 8V .Comparator electronics is possible to operate this comparator wComparator electronicsh a minimum supply voltage of 2V .As a result, 2 channels work together to maintain the quality of the output.A comparator consists of a high-gain COMPARATOR amplifier.Comparator electronics has a rating of 20mA output current.
TLV2352IPE4 Features
TTL output capability
Quiescent Current: 400μA
COMPARATOR amplifier
TLV2352IPE4 Applications
There are a lot of Texas Instruments
TLV2352IPE4 linear comparators applications.
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
