TLV2352IPW Overview

In order to make transportation easier, it is packaged in 8-TSSOP (0.173, 4.40mm Width) .A comparator with an output type of CMOS, MOS, Open-Drain, TTL is being used.We ship the part through Tube .As you can see, the comparator has8 terminals.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 3V voltage.In general, the chip type can be classified as Differential .A total of 2 elements can be found in it.A total of 8 pins are included.A Surface Mount mounting type is recommended.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 8 pins.Alternatively, you may search for TLV2352 to find more pin-to-pin solutions for your specific needs.There is 400μA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 300μA .A current supply greater than 300μA may cause the comparator to malfunction.The device can be run with 3/5V power supplies.Electronic comparator is possible to input a maximum of 5pA current into the device.Comparator electronics is part of the LinCMOS™ comparator series.

TLV2352IPW Features

CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 400μA

TLV2352IPW Applications

There are a lot of Texas Instruments
TLV2352IPW linear comparators applications.

• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics
• General Purpose Low Voltage Applications