TLV2352IPWR Overview

To facilitate transportation, it comes packaged in 8-TSSOP (0.173, 4.40mm Width) .There is a comparator of type CMOS, MOS, Open-Drain, TTL output on this device.The chip is packaged with Cut Tape (CT) .The device is designed with 8 terminations.The chip belongs to Comparator .A comparator supplied with 3V voltage can complete many demanding tasks.Electronic comparator can be classified as a Differential chip.There are a total of 2 elements in it.The board includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .This comparator has 8 pins.In case you are looking for more pin-to-pin solutions, you may want to search TLV2352 .A quiescent current of 400μA is displayed by this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires 300μA supply current.If the current supply exceeds 125μA , the comparator might be damaged.This device requires 3/5V power supplies to operate.Input current to the device cannot exceed 5pA .The part is based on LinCMOS™ .Comparator electronics is acceptable to pack the device by TR .

TLV2352IPWR Features

CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 400μA

TLV2352IPWR Applications

There are a lot of Texas Instruments
TLV2352IPWR linear comparators applications.

• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics
• General Purpose Low Voltage Applications
• Limit Comparators