TLV2354INE4 Overview
In order to make transportation easier, it is packaged in PDIP .A comparator with an output type of TTL is being used.As you can see, the comparator has14 terminals.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 3V voltage.A total of 14 pins are included.The comparator consists of 14 pins.There is 800μA current flowing in this comparator.There is a Through Hole on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 125μA .A current supply greater than 125μA may cause the comparator to malfunction.The device can be run with 3/5V power supplies.Electronic comparator is possible to input a maximum of 5pA current into the device.In general, temperatures higher than 85°C are not recommended.Comparator electronics will not be able to function at temperatures below -40°C .A comparator's maximum supply voltage is 8V volts.Using a voltage as low as 2V is possible for this comparator.For the output quality to be maintained, 4 channels work together.There is essentially a very high gain COMPARATOR amplifier in the comparator.A 20mA output current is specified for this device.
TLV2354INE4 Features
TTL output capability
Quiescent Current: 800μA
COMPARATOR amplifier
TLV2354INE4 Applications
There are a lot of Texas Instruments
TLV2354INE4 linear comparators applications.
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
