TLV2374ID Overview

It is packaged in an 14-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp ic of the General Purpose type. Linear amplifier is delivered in a Tube case. A total of 14 pins are present on the instrumentation amplifier. Op amp ic rates 4.5mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Operational amplifier can operate supply current at 750μA. There should be no change in the voltage gain at 110dB. There are 4 circuits on op amps. There are a total of 4 channels available on the op amps. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The temperature should not be lower than -40°C for operational amplifier ics to operate. Use op amp only at temperatures no higher than 125°C. The buffer op amp is rated for an operating voltage of 4 when it comes to the power supply. The operating supply voltage of the buffer op amp is rated at 8V. There is a recommendation that this electrical part be used with a supply with 750μA current rating. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 16V. Keeping the linear amplifier's supply voltage above 2.7V is recommended. There should be a dual supply voltage of 8V for you to conduct this electrical part. There are 4 amplifiers on it.

TLV2374ID Features

110dB voltage gain
Output Type: Rail-to-Rail

TLV2374ID Applications

There are a lot of Texas Instruments TLV2374ID Instrumentational OP Amps applications.

• Automotive sensors
• Fast A/D and D/A converters
• Logarithmic operation circuits
• Power transmission
• Large motor controllers
• PDA
• Wireless base stations
• Mobile phone
• Automatic control
• Switching amplifier