2 Channels 200μA per Channel 100pA 63 dB Instrumentational OP Amps 0.0009μA 8V 2.5V~16V ±1.25V~8V TLV2402 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
SOT-23
TLV2402IDGKRG4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
6 Weeks
Lifecycle Status
ACTIVE (Last Updated: 2 days ago)
Mounting Type
Surface Mount
Package / Case
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount
YES
Number of Pins
8
Operating Temperature
-40°C~125°C
Packaging
Tape & Reel (TR)
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory
Operational Amplifier
Packing Method
TR
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
2
Supply Voltage
2.7V
Terminal Pitch
0.65mm
Base Part Number
TLV2402
Pin Count
8
Output Type
Rail-to-Rail
Operating Supply Voltage
8V
Number of Channels
2
Operating Supply Current
900nA
Nominal Supply Current
1.98μA
Output Current
200μA
Slew Rate
0.0025V/μs
Architecture
VOLTAGE-FEEDBACK
Amplifier Type
General Purpose
Common Mode Rejection Ratio
63 dB
Current - Input Bias
100pA
Voltage - Supply, Single/Dual (±)
2.5V~16V ±1.25V~8V
Output Current per Channel
200μA
Input Offset Voltage (Vos)
390μV
Bandwidth
5.5 kHz
Unity Gain BW-Nom
5.5 kHz
Voltage Gain
120dB
Average Bias Current-Max (IIB)
0.0009μA
Low-Offset
NO
Frequency Compensation
YES
Supply Voltage Limit-Max
17V
Low-Bias
YES
Micropower
NO
Bias Current-Max (IIB) @25C
0.0003μA
Programmable Power
NO
Nominal Gain Bandwidth Product
5.5 kHz
Max I/O Voltage
1.2mV
Power
NO
Height
1.07mm
Length
3mm
Width
3mm
Thickness
970μm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
2,500
$1.37389
$2.74778
TLV2402IDGKRG4 Product Details
TLV2402IDGKRG4 Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. This is a General Purpose type op amp. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. In this case, there are 8 pins on the board. Please take in mind that this instrumentation amplifier should be run at 2.7V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, buffer amplifier rates 390μV voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. As long as the supply current of the chip does not exceed 900nA, this op amp ic can operate. Maintain 120dB as the voltage gain. There are 2 channels on the operational amplifiers. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 8V voltage. As a result of this, the buffer amplifier is packed in TR.
TLV2402IDGKRG4 Features
8 Pins supply voltage of 2.7V 120dB voltage gain Output Type: Rail-to-Rail
TLV2402IDGKRG4 Applications
There are a lot of Texas Instruments TLV2402IDGKRG4 Instrumentational OP Amps applications.