TLV2432AQDRG4 Overview

Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations approaches 8. There are a total of 8 pins on this op amp. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, buffer amplifier rates 950μV voltage. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 200μA . There should be no change in the voltage gain at 119.55dB. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. A total of 2 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5V. For the packing of the instrumentation amplifier, TR is adopted. LinCMOS? is the number that corresponds to the series of the buffer op amp.

TLV2432AQDRG4 Features

8 Pins
supply voltage of 3V
119.55dB voltage gain
Output Type: Rail-to-Rail

TLV2432AQDRG4 Applications

There are a lot of Texas Instruments TLV2432AQDRG4 Instrumentational OP Amps applications.

• Large motor controllers
• Non-polarized electrodes
• Commercial audio systems
• Power generator
• Car stereo
• Wireless base stations
• Automatic control
• Signal transformation
• Scintillation detectors
• Medical instruments