TLV2442QPWRG4Q1 Overview

In order to protect the op amps, a 8-TSSOP (0.173, 4.40mm Width) case is used. This is a General Purpose type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. A total of 8 pins are located on this board. This linear amplifier should be powered by an 3V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 300μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, op amp ranges -40°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 750μA and 10 . There should be no change in the voltage gain at 119.55dB. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. The operating supply voltage of the buffer op amp is rated at 5V. The instrumentation amplifier is packed in the form of TR. Automotive, AEC-Q100, LinCMOS? is the number that corresponds to the series of the buffer op amp.

TLV2442QPWRG4Q1 Features

8 Pins
supply voltage of 3V
119.55dB voltage gain
Output Type: Rail-to-Rail

TLV2442QPWRG4Q1 Applications

There are a lot of Texas Instruments TLV2442QPWRG4Q1 Instrumentational OP Amps applications.

• Automotive sensors
• Thermocouples
• Cinema or auditorium audio system
• Radiation thermometry transducers
• PDA
• Hand-held batteries
• Large motor controllers
• High-frequency data acquisition systems
• Video conversion and routing
• Navigation