TLV2451CDG4 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Op amps are General Purpose types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tube case. During the past two weeks, there have been close to 8 terminations. The pins on this board total to 8 in total. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. Instrumentation amplifier is a part of Operational Amplifier. The buffer op amp includes 8 pins. In terms of input offset voltage, operational amplifier rates 1.5mV. This electrical part should be mounted using type Surface Mount. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. It is possible to operate this buffer amplifier from a supply current of 23μA . It is a member of the 103dB's 103dB family. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. Op amp has total of 1 elements. The operating supply voltage of the buffer op amp is rated at 3V.
TLV2451CDG4 Features
8 Pins
supply voltage of 3V
103dB voltage gain
Output Type: Rail-to-Rail
TLV2451CDG4 Applications
There are a lot of Texas Instruments TLV2451CDG4 Instrumentational OP Amps applications.
- RF cable systems
- Polarized electrodes
- Weak signal detection
- Addition operation circuits
- Signal amplification
- Vehicle electronics
- Weighing systems
- Integrator circuits
- earphone
- Multiplication circuits
