TLV2462IDG4 Overview

There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. An op amp of this type is a General Purpose-type. The case in which buffer amplifier is delivered is called a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. Please take in mind that op amp should be run at 3V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. Regarding input offset voltage, op amp rates 2mV. This electrical part should be mounted using type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . Using an 550μA supply current, this operational amplifier ics can be operated. 109dB should be the voltage gain. The op amp ic has 2 channels on it. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The operating supply voltage of the buffer op amp is rated at 3V.

TLV2462IDG4 Features

8 Pins
supply voltage of 3V
109dB voltage gain
Output Type: Rail-to-Rail

TLV2462IDG4 Applications

There are a lot of Texas Instruments TLV2462IDG4 Instrumentational OP Amps applications.

• Signal operation
• Cinema or auditorium audio system
• Differentiator circuits
• Proportional counter tubes
• Large motor controllers
• Measurements of Wheatstone bridge
• Division circuits
• Navigation
• Video data acquisition
• Video amplifiers