TLV2548QDWRG4 Overview

The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 20-SOIC (0.295, 7.50mm Width) package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 20 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3.3V.The A/D converter has 8 channels.The is equipped with 20 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -55°C~125°C.The number of samples of audio recorded every second is 200k Hz.The input type of this electronic AD converter is Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 20 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 3V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to TLV2548 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.A supply type can be classified by a Single number.The supply/digital voltage of this electrical AD converter is 3V~5.5V.The ADC converter operates with the maximal supply voltage of 5.5V.8 inputs are employed.It operates with the minimal supply voltage of 3V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.The ADC converter operates from 3.3/5V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 1.294W. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 3.3mW.The conversion rate of this electrical AD converter is calculated as 200 ksps.The ADC converter consists of 1 elements.The digital converter operates with the minimal supply voltage (DC) of 3V.The ADC converter operates with the maximal supply voltage (DC) of 5.5V.

TLV2548QDWRG4 Features

1 Functions
20 basic kinds of terminations
20 pin count
Minimal supply voltage of 3V
3.3/5V power supplies
1 elements
Maximal supply voltage (DC) of 5.5V

TLV2548QDWRG4 Applications

There are a lot of Texas Instruments TLV2548QDWRG4 ADC applications.

• Digital Multimeters, PLC's (Programming Logic Controllers)
• Multicarrier, multimode digital receivers
• Transducer
• 3-phase power control
• Telecommunications
• Communication test equipment
• Digital Storage Oscilloscope
• Communication Systems
• Communications
• TD-SCDMA, WiMAX