28mA per Channel 2pA 77 dB Instrumentational OP Amps 0.0002μA 2.75V 2.7V~5.5V ±1.35V~2.75V TLV2624 14 Pins 14-SOIC (0.154, 3.90mm Width)
SOT-23
TLV2624IDRG4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
6 Weeks
Mounting Type
Surface Mount
Package / Case
14-SOIC (0.154, 3.90mm Width)
Surface Mount
YES
Number of Pins
14
Operating Temperature
-40°C~125°C
Packaging
Tape & Reel (TR)
JESD-609 Code
e4
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
14
ECCN Code
EAR99
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory
Operational Amplifier
Packing Method
TR
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
5V
Terminal Pitch
1.27mm
Base Part Number
TLV2624
Pin Count
14
Output Type
Rail-to-Rail
Operating Supply Voltage
2.75V
Power Supplies
3/5V
Number of Circuits
4
Operating Supply Current
800μA
Nominal Supply Current
4mA
Output Current
28mA
Slew Rate
7V/μs
Architecture
VOLTAGE-FEEDBACK
Amplifier Type
General Purpose
Common Mode Rejection Ratio
77 dB
Current - Input Bias
2pA
Voltage - Supply, Single/Dual (±)
2.7V~5.5V ±1.35V~2.75V
Output Current per Channel
28mA
Input Offset Voltage (Vos)
250μV
Bandwidth
11MHz
Unity Gain BW-Nom
11000 kHz
Voltage Gain
100dB
Average Bias Current-Max (IIB)
0.0002μA
Low-Offset
NO
Frequency Compensation
YES
Supply Voltage Limit-Max
6V
Low-Bias
YES
Micropower
NO
Bias Current-Max (IIB) @25C
0.00005μA
Programmable Power
NO
Nominal Gain Bandwidth Product
11MHz
Max I/O Voltage
3.5mV
Power
NO
Input Offset Current-Max (IIO)
0.00005μA
Height Seated (Max)
1.75mm
Length
8.65mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
TLV2624IDRG4 Product Details
TLV2624IDRG4 Overview
A 14-SOIC (0.154, 3.90mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 14 terminations in the next few months. There are a total of 14 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this op amp is a type of Operational Amplifier device. There are 14 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 250μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 800μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. On this instrumentation amplifier, there are 4 circuits that are connected together. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 2.75V. The instrumentation amplifier is packed in the form of TR.
TLV2624IDRG4 Features
14 Pins supply voltage of 5V 100dB voltage gain Output Type: Rail-to-Rail
TLV2624IDRG4 Applications
There are a lot of Texas Instruments TLV2624IDRG4 Instrumentational OP Amps applications.