TLV274IPWG4 Overview

It is packaged in an 14-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 5mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 625μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 110dB. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. There are 4 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V.

TLV274IPWG4 Features

14 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail

TLV274IPWG4 Applications

There are a lot of Texas Instruments
TLV274IPWG4 Instrumentational OP Amps applications.

• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering