TLV2763IDGSRG4 Overview
A VSSOP case is used to package the op amp. OPERATIONAL AMPLIFIER-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel case. It is estimated that there will be 10 terminations in the next few months. There are a total of 10 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 2.4V volts. There are 10 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 550μV. An 20μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 2 channels on the operational amplifiers. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 85°C. The instrumentation amplifier is packed in the form of TAPE AND REEL. I would like to point out that this electrical component is capable of working from a voltage below 3.6V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 1.8V at all times. The dual supply voltage of 1.8V should be used for the conduct of this electronic component.
TLV2763IDGSRG4 Features
10 Pins
supply voltage of 2.4V
101.58dB voltage gain
TLV2763IDGSRG4 Applications
There are a lot of Texas Instruments
TLV2763IDGSRG4 Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
