TLV2770AIP Overview

A 8-DIP (0.300, 7.62mm) case is used to package the op amp. Buffer amps of this type are called General Purpose-types. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. The number of terminations is approaching the 8 mark. The pins on this board total to 8 in total. The linear amplifier should be run at 2.7V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. An 8-pin op amp ic is included in the package. There is an input offset voltage of 1.6mV for this buffer op amp. For this electrical component, Through Hole is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. An 1mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 113.06dB. On the buffer amps, there are 1 channels that can be used. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of instrumentation amplifier is rated 3V voltage.

TLV2770AIP Features

8 Pins
supply voltage of 2.7V
113.06dB voltage gain
Output Type: Rail-to-Rail

TLV2770AIP Applications

There are a lot of Texas Instruments TLV2770AIP Instrumentational OP Amps applications.

• Vehicle electronics
• Non-polarized electrodes
• Signal filtering
• Voltage regulation circuit
• Proportional counter tubes
• Oscilloscopes
• Signal amplification
• Mobile phone
• Test equipment
• High speed sample