50mA per Channel 2pA 60 dB Instrumentational OP Amps 0.00035μA 3V 2.5V~5.5V ±1.25V~2.75V TLV2772 8 Pins 8-TSSOP (0.173, 4.40mm Width)
SOT-23
TLV2772AQPWG4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mounting Type
Surface Mount
Package / Case
8-TSSOP (0.173, 4.40mm Width)
Surface Mount
YES
Number of Pins
8
Operating Temperature
-40°C~125°C
Packaging
Tray
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Discontinued
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory
Operational Amplifier
Packing Method
TUBE
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
2
Supply Voltage
2.7V
Terminal Pitch
0.65mm
Base Part Number
TLV2772
Pin Count
8
Output Type
Rail-to-Rail
Operating Supply Voltage
3V
Number of Circuits
2
Operating Supply Current
1mA
Nominal Supply Current
2mA
Output Current
50mA
Slew Rate
10.5V/μs
Architecture
VOLTAGE-FEEDBACK
Amplifier Type
General Purpose
Common Mode Rejection Ratio
60 dB
Current - Input Bias
2pA
Voltage - Supply, Single/Dual (±)
2.5V~5.5V ±1.25V~2.75V
Output Current per Channel
50mA
Input Offset Voltage (Vos)
360μV
Bandwidth
5.1MHz
Unity Gain BW-Nom
4800 kHz
Voltage Gain
113.06dB
Average Bias Current-Max (IIB)
0.00035μA
Low-Offset
NO
Frequency Compensation
YES
Supply Voltage Limit-Max
7V
Low-Bias
YES
Micropower
NO
Bias Current-Max (IIB) @25C
0.00006μA
Programmable Power
NO
Nominal Gain Bandwidth Product
4.8MHz
Max I/O Voltage
1.6mV
Power
NO
Length
4.4mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
TLV2772AQPWG4 Product Details
TLV2772AQPWG4 Overview
It is packaged in an 8-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. This is a General Purpose type op amp. A Tray case is used for delivering the op amp. A total of 8 terminations have been reported in the past few weeks. In total, there are 8 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 2.7V battery. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are included on the operational amplifiers. Op amp rates 360μV as input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, op amp ranges -40°C~125°C. A supply current of 1mA can be used to operate this linear amplifier. There should be no change in the voltage gain. The buffer amp consists of 2 circuits in total. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 3V. For the packing of the instrumentation amplifier, TUBE is adopted.
TLV2772AQPWG4 Features
8 Pins supply voltage of 2.7V 113.06dB voltage gain Output Type: Rail-to-Rail
TLV2772AQPWG4 Applications
There are a lot of Texas Instruments TLV2772AQPWG4 Instrumentational OP Amps applications.