TLV2774AIPW Overview

There is a 14-TSSOP (0.173, 4.40mm Width) case package that contains the instrumentation amplifiers. Op amps are General Purpose types of amplifier on the chip. There is a Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be 14 terminations in the next few months. A total of 14 pins are located on this board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.7V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 14 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 2.1mV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . You can run this op amp ic on 1mA . Maintain 113.06dB as the voltage gain. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The op amp is rated for an operating supply voltage of 4. The operating supply voltage of the buffer op amp is rated at 3V.

TLV2774AIPW Features

14 Pins
supply voltage of 2.7V
113.06dB voltage gain
Output Type: Rail-to-Rail

TLV2774AIPW Applications

There are a lot of Texas Instruments TLV2774AIPW Instrumentational OP Amps applications.

• High-frequency data acquisition systems
• Active probe
• Signal amplification
• Thermocouples
• Laptop
• Industrial control system
• ECG equipment
• Car stereo
• Fission chambers
• Communication