Welcome to Hotenda.com Online Store!

logo
userjoin
Home

TLV27L2IDGKRG4

TLV27L2IDGKRG4

TLV27L2IDGKRG4

Texas Instruments

400μA per Channel 60pA 71 dB Instrumentational OP Amps 0.001μA 8V 8 Pins VSSOP

SOT-23

TLV27L2IDGKRG4 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Surface Mount
Package / Case VSSOP
Number of Pins 8
PackagingTape and Reel
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish NICKEL PALLADIUM GOLD
Max Operating Temperature125°C
Min Operating Temperature -40°C
Subcategory Operational Amplifier
Technology BIMOS
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch0.65mm
Pin Count8
Operating Supply Voltage8V
Number of Elements 2
Temperature GradeAUTOMOTIVE
Max Supply Voltage16V
Min Supply Voltage2.7V
Operating Supply Current 7μA
Nominal Supply Current22μA
Current - Output 400μA
Slew Rate0.06 V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type OPERATIONAL AMPLIFIER
Common Mode Rejection Ratio 71 dB
Current - Input Bias 60pA
Output Current per Channel 400μA
Input Offset Voltage (Vos) 5mV
Bandwidth 160 kHz
Gain Bandwidth Product160 kHz
Unity Gain BW-Nom 160 kHz
Voltage Gain 100dB
Average Bias Current-Max (IIB) 0.001μA
Power Supply Rejection Ratio (PSRR) 74dB
Low-Offset NO
Frequency CompensationYES
Max Dual Supply Voltage8V
Low-Bias YES
MicropowerYES
Min Dual Supply Voltage 1.35V
Bias Current-Max (IIB) @25C 0.00006μA
Programmable PowerNO
Length 3mm
Height Seated (Max) 1.1mm
Radiation HardeningNo
RoHS StatusRoHS Compliant
Lead Free Lead Free
In-Stock:3862 items

TLV27L2IDGKRG4 Product Details

TLV27L2IDGKRG4 Overview


Packaged in a VSSOP case, the buffer op amp is ready to use. An op amp ic of the OPERATIONAL AMPLIFIER type. The op amp is delivered to you in a Tape and Reel case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 5mV for this buffer op amp. As long as the supply current of the chip does not exceed 7μA, this op amp ic can operate. 100dB should remain the voltage gain. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. No temperature greater than 125°C should be used. The linear amplifier consists of 2 different elements in total. The operating supply voltage of the buffer op amp is rated at 8V. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 16V. A high supply voltage of more than 2.7V is recommended for the instrumentation amplifier's supply voltage. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 8V volts.

TLV27L2IDGKRG4 Features


8 Pins
supply voltage of 5V
100dB voltage gain


TLV27L2IDGKRG4 Applications


There are a lot of Texas Instruments
TLV27L2IDGKRG4 Instrumentational OP Amps applications.


  • Integrator circuits
  • Differentiator circuits
  • Logarithmic operation circuits
  • Exponential operation circuits
  • Multiplication circuits
  • Division circuits
  • Precision measurement
  • Power control
  • Information processing
  • Weak signal detection

Get Subscriber

Enter Your Email Address, Get the Latest News