TLV3011AIDBVRG4 Overview

For convenience, it is packaged in SOT-23-6 .There is a Open Drain output type for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has a total of 6 terminals.The electrical component here belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as with Voltage Reference .Electronic comparator consists of 1 elements in total.Electronic comparator has 6 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.The comparator has a pin count of 6 .You can find more pin-to-pin solutions by searching TLV3011 .As a result, this comparator displays a quiescent current of 5μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 5μA when using the device.A supply current exceeding 5μA may result in the comparator malfunctioning.There is sufficient power to run the device from 2/5V power supplies.You can input a maximum current of 10pA into this device.The device is packed in TR and is intended for general use (as an element in the ADC circuit).

TLV3011AIDBVRG4 Features

Open Drain output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 5μA

TLV3011AIDBVRG4 Applications

There are a lot of Texas Instruments
TLV3011AIDBVRG4 linear comparators applications.

• Lithium ion battery monitoring
• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets