TLV320A20KIPFBRG4 Overview

For space-saving purposes, it is packaged in TQFP. Packaging is done in the form of a Tape & Reel (TR). Signals are prevented from reflecting off the end of transmission lines by 48 terminations. There are 48 pins on this device. The board has 48 pins configured. Ideally, the supply voltage should remain at 3.6V. Converting analog signals to digital signals requires 2 A/D converters. Electronic parts classified as Codecs are located in this subcategory. Maintaining a minimum voltage of 1.1V is recommended. This device operates on 1.8V volts as its supply voltage. As a safeguard against overheating, the operating temperature is set to a maximum of 85°C. In order to keep normal operation, the operating temperature is set as a minimum value of -40°C. IT ALSO REQUIRES 3.3V ANALOG SUPPLY is a property of this type. It should not be possible to exceed 2V for the analog input voltage. As far as the analog values can be read at once, this ADC has 1 channels.

TLV320A20KIPFBRG4 Features

Embedded in the TQFP package
2 A/D converters
IT ALSO REQUIRES 3.3V ANALOG SUPPLY

TLV320A20KIPFBRG4 Applications

There are a lot of Texas Instruments TLV320A20KIPFBRG4 CODECs Interface ICs applications.

• Addition
• Code conversion
• Digital systems
• Oil & gas production
• Ships navigation
• Translating the decimal values to the binary
• Ball screw positioning
• Automated Guided Vehicles (AGV)
• Dynamic applications
• Dimensionality reduction