TLV3402IPE4 Overview
For convenience, it is packaged in PDIP .The comparator has a total of 8 terminals.With a 5V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as General Purpose .Electronic comparator has 8 pins.The comparator has a pin count of 8 .As a result, this comparator displays a quiescent current of 950nA .This component has a Through Hole mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 640nA when using the device.A supply current exceeding 640nA may result in the comparator malfunctioning.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 120dB .Comparator electronics is not recommended to operate the system at a temperature above 125°C .Comparator electronics cannot be used at a temperature below -40°C .Comparator electronics is specified that the comparator's maximum supply voltage is 16V .A minimum supply voltage of 2.7V is permitted for this comparator.To ensure a high level of output quality, 2 channels work together.Comparator electronics has an output current rated at 10mA .
TLV3402IPE4 Features
General Purpose IC
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3402IPE4 Applications
There are a lot of Texas Instruments
TLV3402IPE4 linear comparators applications.
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
