TLV3494AIPWTG4 Overview
A convenient transport package is provided in TSSOP .The part will be shipped by Tape & Reel (TR) .There are 14 terminals on the comparator.The electrical component in this case belongs to the Comparator families.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Electronic comparator is possible to classify the chip as General Purpose .As a result, it contains 14 pins.The comparator is equipped with 14 pins.There is a quiescent current of 1.2μA in this comparator.The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current be 1.2μA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 1.2μA .In order to run the device, there are only 2/5V power supplies required.A maximum current of 10pA can be supplied to the device.An increase in temperature over 125°C is not recommended.Comparator electronics cannot be operated at a temperature lower than -40°C .In the comparator, the maximum supply voltage is 5.5V .Comparator electronics is possible to operate this comparator wComparator electronicsh a minimum supply voltage of 1.8V .As a result, 4 channels work together to maintain the quality of the output.
TLV3494AIPWTG4 Features
General Purpose IC
Quiescent Current: 1.2μA
TLV3494AIPWTG4 Applications
There are a lot of Texas Instruments
TLV3494AIPWTG4 linear comparators applications.
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
