TLV3702QDRG4Q1 Overview

For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has an output type of CMOS, Push-Pull, Rail-to-Rail .The part is shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.This is a typical comparator of type General Purpose .This element consists of 2 elements in total.As a result, it contains 8 pins.The type of mounting recommended is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.The comparator is equipped with 8 pins.You may wish to search TLV3702 for more solutions that address your specific needs.A quiescent current of 1.2μA is observed in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 1.6μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 1.6μA .Electronic comparator is possible to input up to 250pA current into the device.A voltage gain of 120dB can be determined from the voltage formula for the part.This part is from the Automotive, AEC-Q100 comparator series.Often found in ADC circuits, this device is packed in TR .

TLV3702QDRG4Q1 Features

CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 1.2μA
Voltage Gain: 120dB

TLV3702QDRG4Q1 Applications

There are a lot of Texas Instruments TLV3702QDRG4Q1 linear comparators applications.

• Point of load regulators
• General-Purpose Portable Devices
• Body Control Modules
• Set Top Boxes
• Motor drives
• High-Speed Sampling Circuits
• Ultra-Low Power Systems
• Battery-Powered Electronics
• Laptop Computers
• Power management