TLV7211IDRG4 Overview
In order to make transportation easier, it is packaged in SOIC .We ship the part through Tape & Reel (TR) .As you can see, the comparator has8 terminals.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In general, the chip type can be classified as General Purpose .A total of 8 pins are included.The comparator consists of 8 pins.There is 18μA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 7μA .A current supply greater than 7μA may cause the comparator to malfunction.Electronic comparator is possible to input a maximum of 40 fA current into the device.Comparator electronics follows that the voltage gain of the part is 100dB .In general, temperatures higher than 85°C are not recommended.Comparator electronics will not be able to function at temperatures below -40°C .A comparator's maximum supply voltage is 15V volts.Using a voltage as low as 2.7V is possible for this comparator.For the output quality to be maintained, 1 channels work together.A 30mA output current is specified for this device.
TLV7211IDRG4 Features
General Purpose IC
Quiescent Current: 18μA
Voltage Gain: 100dB
TLV7211IDRG4 Applications
There are a lot of Texas Instruments
TLV7211IDRG4 linear comparators applications.
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
