TPA711D Overview

8-SOIC (0.154, 3.90mm Width) contains an embedded device.Amp parts is recommended that the chip be packaged in the case Tube .The 8 termination refers to terminating transmission lines with devices that match their characteristic impedance.Currently, amp parts is configured wAmp partsh 1-Channel (Mono) as the output.The device belongs to the Class AB type of electrical devices.As part of the signal interface in a computer or other communication device, there are 8 pins.The chip is mounted by Surface Mount .Electrical devices like this one have a 2.5V~5.5V supply voltage.The chip is equipped with 1 channels.Amp parts is possible to guarantee Depop, Short-Circuit and Thermal Protection, Shutdown when operating.The operating temperature should not exceed -40°C~85°C TA °C.The number of pins is 8 .This chip is included in the TPA711 family.The chip should be mounted in the way of Surface Mount .A maximum output power of 700mW kWh per hour is possible for this electronic part.A normal operation is dependent upon the supply voltage (Vsup) remaining above 2.5V .During this time, the maximum supply voltage (Vsup) reaches 5.5V volts.There is a Single supply type on this electronic part.The device is powered by a voltage supply of 3.3/5V volts.Amp parts consumes a quiescent current of 1.25mA .

TPA711D Features

8-SOIC (0.154, 3.90mm Width) package
8 pin count
TPA711 family
700mW kWh per hour

TPA711D Applications

There are a lot of Texas Instruments
TPA711D audio amplifiers applications.

• Proportional operation circuits
• Inverse/same-phase proportional circuit
• Addition and subtraction operation circuits
• single/dual op amp sum and difference circuits
• Integrator and differentiator circuits
• Logarithmic and exponential operation circuits
• Multiplication and division circuits
• Precision measurement
• Power control
• Information processing