TPA711DGNR Overview

This package is embedded in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad .This device is packaged in the way of Cut Tape (CT) .8 terminations occur when a transmission line is terminated by a device with the same characteristic impedance as the transmission line.Amp parts uses 1-Channel (Mono) as the output.Class AB is the type of this electrical device.Computers or other communication devices have 8 pins, which are pronged contacts.Amp parts is mounted in the way of Surface Mount .There is 2.5V~5.5V supply voltage for this electrical device.Amp parts is equipped wAmp partsh 1 channels.When operating, it is possible to ensure Depop, Short-Circuit and Thermal Protection, Shutdown .Ideally, the operating temperature should not exceed -40°C~85°C TA .The device is equipped with 8 pins.This item belongs to the family of TPA711 .A maximum output power of 700mW kWh per hour can be achieved with this electronic part.Amp parts is recommended that the supply voltage (Vsup) be maintained above 2.5V for normal operation.5.5V represents the maximal supply voltage (Vsup).There is a supply type of Single for this electronic part.The device is powered by a voltage of 3.3/5V .Despite external influences, it consumes 1.25mA of quiescent current.

TPA711DGNR Features

8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
8 pin count
TPA711 family
700mW kWh per hour

TPA711DGNR Applications

There are a lot of Texas Instruments
TPA711DGNR audio amplifiers applications.

• Addition and subtraction operation circuits
• single/dual op amp sum and difference circuits
• Integrator and differentiator circuits
• Logarithmic and exponential operation circuits
• Multiplication and division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification