TPIC6B273DWR Overview

There is an embedded version of it in package 20-SOIC (0.295, 7.50mm Width). The package is in the form of Cut Tape (CT). In this configuration, the output is set to Standard. In this electrical device, the logic type is D-Type Latch. Mounting this electronic component follows the Surface Mount method. With a supply voltage of 4.5V~5.5V, it operates. There is -40°C~125°C operating temperature. TPIC is the series number of this FPGA. This electronic part is designed with 8 Bits. This device has 20 terminations. This type belongs to the TPIC6B273 family. In order to function, the supply voltage should be set to 5V. There are 20 pins attached to it. In the world of electronics, this electronic device belongs to the family of 6B. It is designed with 20 pins. A Surface Mount mounting method has been used for this electronic part. This part can be found within the FF/Latches subcategory. There are 5V power supplies attached to it. This device is well suited for TR based on its reliable performance. The output current of 150mA makes it feature maximum design flexibility. In order to achieve high efficiency, the supply voltage should be kept at 5V. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. A total of 1 elements make up this object. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.3mA.

TPIC6B273DWR Features

20-SOIC (0.295, 7.50mm Width) package
TPIC series
8 Bits
TPIC6B273 family
20 pin count
20 pins
5V power supplies
1 elements

TPIC6B273DWR Applications

There are a lot of Texas Instruments TPIC6B273DWR Latches applications.

• Automotive HEV/EV Powertrain
• Counters
• Avionics
• Clocks
• Buffer Storage
• Synchronous frequency dividers
• Display
• Double bus register system
• Bus system register with enable parallel lines at bus side
• Up/down difference counting