TPS2012DRG4 Overview

As a result, it is packaged in the form of a Tape & Reel (TR).The 8-SOIC (0.154, 3.90mm Width) package includes it.The mounting type of the LED driver is Surface Mount.There is a switch type of General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.As a default, the output is set to 1.In order to operate, it requires a voltage supply of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.The TPS2012 family contains this object.In total, there are 8 terminations.It is necessary to use the 8 pins in order to operate the LED driver.It has 1 functions.In order to meet the operation criteria, the maximum output current drops to 1A.Using a voltage of 3V allows for high efficiency.There are 8 pins in total on this board.In this LED driving board, there is 75mOhm resistance.This case results in a 1A output current.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 1 channels.When using this LED driving board, it is recommended that the supply voltage is set to 5.5V.It has a maximum input voltage of 5.5V volts.It has a 2.7V volt minimum input voltage.It requires 73μA current to operate.

TPS2012DRG4 Features

Supplied from 3V
Resistance of 75mOhm
1 channels

TPS2012DRG4 Applications

There are a lot of Texas Instruments TPS2012DRG4 Power Switches ICs applications.

• Hot Swap
• HDD, SSD
• Handheld Devices
• Hot-Swap Systems
• Notebook and Tablet Computers
• Low Voltage I/O System Power
• Hard Disk Drives
• Storage (HDDs, SSDs)
• PDAs
• Wireless/Networking Cards