TPS2053ADR Overview

Tape & Reel (TR) is how it's packaged.There is a package for it in the 16-SOIC (0.154, 3.90mm Width) package.The LED driver is mounted as Surface Mount.The switch type of this switch is General Purpose.To ensure reliable operation, the temperature should be set to 0°C~125°C TJ.The LED driver has 3 outputs.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts has been specified.Currently, the LED driving board is equipped with Status Flag features.It is part of the TPS2053 family of LED drivers.A total of 16 terminations can be found in it.The 16 pins are used for the operation of the system.It contains 1 functions.This LED driver has a maximum output of 500mAV.Supply voltages of 3.3V allow for high efficiency.The LED driving board is mounted in the way of Surface Mount.A total of 16 pins are present on it.The LED driver is configured with a maximum supply voltage of 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 2.7V.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.You can select from 3 channels.

TPS2053ADR Features

Supplied from 3.3V
3 channels

TPS2053ADR Applications

There are a lot of Texas Instruments TPS2053ADR Power Switches ICs applications.

• Notebook PC
• Hard Disk Drives
• Handheld Devices
• PC Cards
• Storage Drives
• Set-Top Boxes
• Solid-State Drives
• Mobile Communication Devices
• Hot Swaps
• Portable GPS Device