TPS2112PWG4 Overview

The case comes in TSSOP shape. Parts should be packed in Tube cases. Surface Mount is the way the part is mounted. There is a voltage of 2.8 V ~ 5.5 V applied to it. It is not allowed for this component to operate below -40°C ~ 85°C degrees. A component connected in Handheld/Mobile Devices would be a good fit for it. There is a Source Selector Switch classification for the device. A N-Channel-type FET can be identified. The part comes with 8 terminations. The device is designed with 8 pins. It is based on TPS2112. The performance of this device is powered by 2.8V. To run 260, we utilize the part's peak reflow temperature. It is necessary to run the supply current at 55µA for the part. In this part, there are 8 pins. In order to operate it, 55μA is used as the supply current. Isup (supply current) should conduct under 0.09mA. In this case, 1 outputs are available. Under 750mA, the output current can conduct through the chip. It is possible to use the chip with voltages greater than 5.5V volts. Low input voltages of less than 2.8V volts will not damage the chip. Parts can be delivered with 750mA output current. ---series devices are considered to be the best. Using 5.5V as the supply voltage, this device can be operated. Run-by-2 inputs are provided on the part. Using the part above -40°C is recommended. It is recommended to use the part when the temperature falls below 85°C.

TPS2112PWG4 Features

in a TSSOP case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs

TPS2112PWG4 Applications

There are a lot of Texas Instruments
TPS2112PWG4 Ideal Diode controller applications.

• Digital Cameras
• Modems
• Cell phones
• Digital Radios
• MP3 Players
• Active OR-ing of Redundant (N+1) Power Supplies
• Automotive battery protection
• ADAS domain controller
• Camera ECU
• Head Unit