TPS2210APWPR Overview

The LED driver's packaged as a Tape & Reel (TR).The 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package contains it.It has been mounted as Surface Mount on the LED driver.The switch type of this switch is PCMCIA Switch.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 2 outputs that are available for use.In order to operate, it requires a voltage supply of Not Required.It is equipped with Status Flag features.It belongs to the TPS2210 family.A total of 24 terminations have been recorded.For operation, we use the 24 pins.It contains 1 functions.The LED driver output is limited to 1AV.With a supply voltage of 3.3V, high efficiency is possible.The lighting driver is mounted in the way of Surface Mount.The LED driver has a total of 24 pins.It has a resistance of 85mOhm.Self-contained in an econtainer with a capacity of Power Management Circuits, this LED driver is self-contained.The maximum supply voltage for this LED driver is 3.6V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 3V.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.We offer 3 channels in total.Through the use of this lighting driver, we can also produce ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V.

TPS2210APWPR Features

Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like ALSO REQUIRES A SUPPLY OF 3 TO 5.5V & 7 TO 13.5V

TPS2210APWPR Applications

There are a lot of Texas Instruments TPS2210APWPR Power Switches ICs applications.

• Wearable Devices
• Hard Disk Drives
• Handheld Devices
• Wireless/Networking Cards
• Gaming
• Telecom and Network Systems
• USB Power Distribution
• Wireless Modem Data Cards
• Hot Swap
• Portable GPS Device