TPS22903YFPR Overview

The LED driver's packaged as a Tape & Reel (TR).The 4-XFBGA, DSBGA package contains it.This LED driving board is mounted using the mounting type Surface Mount.The switch type is General Purpose.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The LED driver has 1 outputs.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of P-Channel volts on this LED driver.As far as features are concerned, the LED driving board has Slew Rate Controlled.I believe it belongs to the TPS22903 family.It contains 4 terminations.4 pins are used for operation.The LED driving board has a total of 1 functions.This results in the maximum output current dropping to 500mA to meet the operation criteria.The supply voltage can be 3.3V for high efficiency.This lighting driver is mounted in the way of Surface Mount.A total of 4 pins are present on it.There is 90mOhm resistance on the LED driver.As a result, the output current is set to 500mA.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.In total, 1 channels are available.In order to achieve the best efficiency, the supply voltage should be set to 3.6V.Voltage input is limited to 3.6V volts.The input voltage minimum is 1.1V volts.

TPS22903YFPR Features

Supplied from 3.3V
Resistance of 90mOhm
1 channels

TPS22903YFPR Applications

There are a lot of Texas Instruments TPS22903YFPR Power Switches ICs applications.

• Portable Music Players
• USB Power Distribution
• Hard Disk Drives
• Hot-Swap Systems
• USB Protection
• Telecom and Network Systems
• Solid State Drivers
• Notebook PC
• USB3.1 Power Delivery
• Low Voltage I/O System Power