TPS22920YZPT Overview

It is packaged in the manner of a Tape & Reel (TR).This package is included in 8-XFBGA, DSBGA.Mounting type Surface Mount is selected for the LED driving board.This switch is of type General Purpose.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.It is possible to use 1 outputs in the lighting driver.Operation is based on a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.As far as features are concerned, the LED driving board has Load Discharge, Slew Rate Controlled.It is a member of the TPS22920 family.A total of 8 terminations have been recorded.In order to operate, 8 pins are used.As far as functions are concerned, the lighting driver has 1.This operation requires the maximum output current to be decreased to 4A.The supply voltage can be 1.05V for high efficiency.This lighting driver is mounted in the way of Surface Mount.A total of 8 pins are included in this LED driver.Lighting drivers with 7.3mOhm resistance are used.The output current is set to 4A in this case.The supply voltage (Vsup) should be kept above 0.75V for normal operation.The gadget uses an analog IC, which is ANALOG CIRCUIT in this case.You can select from 1 channels.In order to maximize efficiency, the supply voltage should be set at 3.6V.The maximum input voltage of the LED driver is 3.6V volts.It requires 750mV volts as the minimum input voltage.

TPS22920YZPT Features

Supplied from 1.05V
Resistance of 7.3mOhm
1 channels

TPS22920YZPT Applications

There are a lot of Texas Instruments TPS22920YZPT Power Switches ICs applications.

• Solid State Drivers
• USB Ports/Hubs
• Hot Swap
• Portable GPS Device
• Wireless/Networking Cards
• PC Cards
• Handheld Devices
• USB3.1 Power Delivery
• USB Power Distribution
• Portable Devices