TPS2331IPWRG4 Overview

You can find it in the 14-TSSOP (0.173, 4.40mm Width) package.At the moment, 1 channels are accessible.In the form of a Tape & Reel (TR), it is packaged.The terminations total 14.In this case, the device is located at terminal DUAL.The device has a total of 14 pins.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 4.5V.Surface Mount has set it up this way.An electrical component classified as Hot Swap Controller belongs to this category.Ensure reliable operation by setting the temperature to -40°C~85°C.A General Purpose application is available for the device.There is a mention of it in Latched Fault, UVLO.In theory, it should work as long as the power source has a 3V~13VV input.This number is a member of the TPS2331 family.In order to operate, 14 pins are used.The programmable features of this device are Circuit Breaker, Fault Timeout, Slew Rate.Presently, there is a limited supply of 500μA.In Surface Mount direction, it is positioned.Normally, Vsup should remain above 3V.Its maximum current requirement is 1mA.Using this device, you can also produce REQUIRES 3V TO 5.5V SUPPLY FOR CHANNEL 2.21V output voltages are capable of high efficiency.

TPS2331IPWRG4 Features

The terminal position of 14
Features of Latched Fault, UVLO
Programmable features of Circuit Breaker, Fault Timeout, Slew Rate
Output voltage of 21V

TPS2331IPWRG4 Applications

There are a lot of Texas Instruments
TPS2331IPWRG4 hot swap controllers applications.

• Industrial
• Datacom
• Electric vehicle
• Avionics systems
• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane