TPS2376DDA-H Overview

There is an embedded version of it in the Tube package.In other words, 8-PowerSOIC (0.154, 3.90mm Width) refers to the way in which it is packaged.PoE controllers of this type are called Controller (PD).Channel number is growing strong/weak: 1.Keeping its operating temperature at -40°C~85°C ensures PoE reliability.There is a voltage of 0V~57V that is used for the supply voltage of this electrical Po E controller.A part number's Po E controllers of TPS2376 can be determined by its base number.An 8 termination involves terminating a transmission line with a power over ethernet controller with a characteristic impedance that matches the line's characteristics.In addition, it comes with a 8 pin count.The Po E controller in question is Po E controller of Power Management Circuits.The board has 8 pins.During the reflow process of this electrical ethernet power controller, Cel (peak reflow temperature) reaches 260.It is recommended that the supply voltage be greater than 48V.It reaches 0.6mA when the maximal current (Isup) supplied for it to operate is reached.240μA requires a supply current to function correctly.2mA features maximum design flexibility due to its output current.This PoE controller operates at 57V volts.In this case, 1Ohm (*) is the value of its resistance.A 12.95W watt power output is achieved by this ethernet over power controller.

TPS2376DDA-H Features

Tube package
8 pin count
8 pins
The output current of 2mA
1Ohm (Ω)

TPS2376DDA-H Applications

There are a lot of Texas Instruments TPS2376DDA-H Power Over Ethernet (PoE) Controllers applications.

• Outdoor Security Camera Equipment
• VoIP Phones
• RFID Readers
• Non-Compliant, Application Specific Devices
• Switches
• POS Terminals
• Higher Power Ethernet Powered Devices
• 4PPOE
• Wireless LAN Access Point/WiMAX? Base Station
• IEEE 802.3bt (Draft) Compliant Devices