TPS2391DGK Overview

In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package you will find it.Channel 1 is currently available.A Tube-shaped package holds it.The 8 terminations total to three.Device DUAL is located at the terminal position.The device consists of a total of 8 pins.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to -40°C~85°C.Apps for -48V are available on the device.A feature of Auto Retry, UVLO describes it.Using a -80V~-36VV power source should be able to power the device.The TPS2391 family includes it.During operation, 8 pins are used.Hot-swappable device has Current Limit, Fault Timeout, Slew Rate programmable features.As you can see, it is positioned in the direction of Surface Mount.Hot Swap is 1.5mA which is the operative supply current.There is a maximum current requirement of 1.5mA for it to operate.In the case of a 65V output voltage, high efficiency can be achieved.

TPS2391DGK Features

The terminal position of 8
Features of Auto Retry, UVLO
Programmable features of Current Limit, Fault Timeout, Slew Rate
Output voltage of 65V

TPS2391DGK Applications

There are a lot of Texas Instruments
TPS2391DGK hot swap controllers applications.

• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems