TPS2393APW Overview

In the 14-TSSOP (0.173, 4.40mm Width) package you will find it.Channel 1 is currently available.A Tube-shaped package holds it.The 14 terminations total to three.Device DUAL is located at the terminal position.The device consists of a total of 14 pins.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to -40°C~85°C.Apps for -48V are available on the device.A feature of Auto Retry describes it.Using a -80V~-20VV power source should be able to power the device.The TPS2393 family includes it.During operation, 14 pins are used.Hot-swappable device has Current Limit, Fault Timeout, OVP, Slew Rate, UVLO programmable features.Presently, there is a sufficient supply of 1.05mA.As you can see, it is positioned in the direction of Surface Mount.Part -48V is associated with power supplies.There is a maximum current requirement of 1.7mA for it to operate.In the case of a 65V output voltage, high efficiency can be achieved.

TPS2393APW Features

The terminal position of 14
Features of Auto Retry
Programmable features of Current Limit, Fault Timeout, OVP, Slew Rate, UVLO
Output voltage of 65V

TPS2393APW Applications

There are a lot of Texas Instruments
TPS2393APW hot swap controllers applications.

• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems