TPS2398DGKRG4 Overview

In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package you will find it.Channel 1 is currently available.A Tape & Reel (TR)-shaped package holds it.The 8 terminations total to three.Device DUAL is located at the terminal position.The device consists of a total of 8 pins.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to -40°C~85°C.A feature of Latched Fault, UVLO describes it.Using a -80V~-36VV power source should be able to power the device.The TPS2398 family includes it.During operation, 8 pins are used.Hot-swappable device has Current Limit, Fault Timeout, Slew Rate programmable features.Presently, there is a sufficient supply of 700μA.As you can see, it is positioned in the direction of Surface Mount.In the case of a 65V output voltage, high efficiency can be achieved.

TPS2398DGKRG4 Features

The terminal position of 8
Features of Latched Fault, UVLO
Programmable features of Current Limit, Fault Timeout, Slew Rate
Output voltage of 65V

TPS2398DGKRG4 Applications

There are a lot of Texas Instruments
TPS2398DGKRG4 hot swap controllers applications.

• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems