TPS24770RGER Overview

In the 24-VFQFN Exposed Pad package you will find it.Channel 1 is currently available.A Tape & Reel (TR)-shaped package holds it.The 24 terminations total to three.Device QUAD is located at the terminal position.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to -40°C~125°C.Apps for General Purpose are available on the device.A feature of Latched Fault describes it.Using a 2.5V~18VV power source should be able to power the device.The TPS24770 family includes it.During operation, 24 pins are used.Hot-swappable device has Current Limit, Fault Timeout, OVP, Slew Rate, UVLO programmable features.As you can see, it is positioned in the direction of Surface Mount.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 2.5V so that the device can function normally.Hot Swap is 2.95mA which is the operative supply current.There is a maximum current requirement of 4mA for it to operate.

TPS24770RGER Features

Features of Latched Fault
Programmable features of Current Limit, Fault Timeout, OVP, Slew Rate, UVLO

TPS24770RGER Applications

There are a lot of Texas Instruments
TPS24770RGER hot swap controllers applications.

• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems