TPS2492PW Overview

This is included in the 14-TSSOP (0.173, 4.40mm Width) package.At present, 1 channels are available.It's packaged in a Tube shape.Total terminations are 14.Device position DUAL is its terminal position.In total, there are 14 pins on it.A supply voltage of 48V can result in high efficiency.According to Surface Mount, it has been set up.Electric components of this type are classified as Hot Swap Controller, Monitor.For reliable operation, set the temperature to -40°C~125°C.Application General Purpose is available on the device.As you can see in Latched Fault, it's featured.The device should be able to be powered by a 9V~80VV power source.There are numbers in the TPS2492 family that include it.14 pins are used in operation.There are Current Limit, Fault Timeout, OVP, UVLO features that can be programmed.In the present, there is a shortage of 1mA.Positioned in direction of Surface Mount, it is at a right angle.Hot-swappable device is important that the supply voltage (Vsup) is kept above 9V for normal operation of the device.Hot Swap requires 665μA volts of current to operate.3V output voltage enables high efficiency.

TPS2492PW Features

The terminal position of 14
Features of Latched Fault
Programmable features of Current Limit, Fault Timeout, OVP, UVLO
Output voltage of 3V

TPS2492PW Applications

There are a lot of Texas Instruments
TPS2492PW hot swap controllers applications.

• Avionics systems
• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies