TPS2540RTER Overview

The package is in the form of a Tape & Reel (TR).Package 16-WFQFN Exposed Pad contains it.The lighting driver is mounted in the Surface Mount position.There is a switch type of USB Switch.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.It is possible to use 1 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.A lighting driver with Status Flag features is available.The TPS2540 family consists of this type.There are 16 terminations in it.The operation is performed through the 16 pins.The LED driving board has a total of 1 functions.To meet the operation criteria, the maximum output current drops to 2.5A.High efficiency is possible when the supply voltage is set to 5V.The LED driving board is mounted in the way of Surface Mount.This LED driver is equipped with a total of 16 pins.It has a resistance of 120mOhm.A self-contained container with a capacity of Power Management Circuits contains this lighting driver.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 1 channels available.A 5V power supply is used by the part.A maximum input voltage of 5.5V volts can be applied to it.It has a 4.5V volt minimum input voltage.

TPS2540RTER Features

Supplied from 5V
Resistance of 120mOhm
1 channels

TPS2540RTER Applications

There are a lot of Texas Instruments TPS2540RTER Power Switches ICs applications.

• Storage (HDDs, SSDs)
• Handheld Devices
• Hard Disk Drives
• USB Protection
• Notebook and Tablet Computers
• Portable GPS Device
• USB Power Distribution
• Wearable Devices
• Portable GPS
• HDD, SSD