TPS2817DBVT Overview

For greater flexibility, its SC-74A, SOT-753 package is used.Tape & Reel (TR) represents the package.Ideally, it should be mounted in the direction of Surface Mount.When the supply voltage is set to 4V~14V, it can demonstrate its superiority.This device is designed with a N-Channel MOSFET gate type.There is a temperature range for this device of -40°C~125°C TA.Mosfet driver accepts input of type Non-Inverting.It's configured with 5 terminations.Under its base part number TPS2817, various related parts can be found.Mounting the device requires Surface Mount.At the time of design, it is configured with 5 pins.Mosfet driver is designed specifically to run on 10V volts of power.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.In the maximum case, the output current can be 2A volts.Within this subcategory of MOSFET Drivers, there are several useful electronic components.Components with 5 pins are available.The basis has 1 integrated outputs.The output current of this device can be set to 2A.Considering its maximum power dissipation, 437mW shows its maximum capacity to transfer and conduct power loss without overheating.A voltage of 15.5V is output by this device.Mosfet gate drivers is recommended that the operating voltage of the supply be set at 10V.In general, it is recommended to keep the maximum output voltage at 13V.

TPS2817DBVT Features

Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
5 pins
Maximum power dissipation of 437mW

TPS2817DBVT Applications

There are a lot of Texas Instruments TPS2817DBVT gate drivers applications.

• Isolated switch mode power supplies (SMPS)
• RGB applications
• Uninterruptible Power Supplies (UPS)
• Commercial air-conditioning (CAC)
• Refrigerator
• Isolated Supplies for Motor Control
• A/D drivers
• Portable Navigation Devices
• Broadcast equipment
• Portable computers