TPS3103E12DBVT Overview

A total of 6 terminals are used to mount this power management. There is a Tape & Reel (TR)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. For your reference, this PMIC includes a list of SOT-23-6 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. In a 1.2V supply voltage, the power management conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 6 pins on power management. This power management has 6 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 400mV. The supply voltage (Vsup) should not exceed 3.3V volts in this IC power. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~85°C TJ degrees. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. As far as the supply current of the power management is concerned, it is 1.2μA. It is always advisable to use TPS3103E12, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management can work with a maximum supply temperature of 27μA.

TPS3103E12DBVT Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 400mV
1.2μA operating supply current

TPS3103E12DBVT Applications

There are a lot of Texas Instruments TPS3103E12DBVT Voltage Supervisors applications.

• Military communications
• Kitchen appliances
• Data storage applications
• Smart meter
• Battery cars
• Sensitive sensors
• Detection of phase sequence
• Low voltage/high power - AI, GPU
• Unattended substation automation
• Radar