TPS3106E09DBVR Overview

There are 6 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for SOT-23-6 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 0.9V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. It is possible to subcategorize this power ic as a Power Management Circuits chip. 6 pins are present in total in this power management. This power management system has 6 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 400mV. The supply voltage (Vsup) should not exceed 3.3V volts in this IC power. The mounting type of the supervisors is Surface MountThis power management is the recommended temperature range for the supervisors: -40°C~85°C TJ. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 1.2μA. To find similar IC managements from the manufacturer, you can always search by TPS3106E09. The maximum supply temperature that PMIC chip can work with is 27μA.

TPS3106E09DBVR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 400mV
1.2μA operating supply current

TPS3106E09DBVR Applications

There are a lot of Texas Instruments TPS3106E09DBVR Voltage Supervisors applications.

• Consumer electronics
• Household appliances
• Automotive permanent magnet synchronous motors
• Multi-voltage system
• Automotive power systems
• Leakage protection
• Low voltage/high power - AI, GPU
• Dash board
• DC stabilized power supply module
• Digitally controlled LDO regulators circuit