TPS3110E09DBVTG4 Overview
This power management consists of 6 mounting terminals on which it can be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. In this PMIC, you can find SOT-23-6 functions for your reference. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. IC management conducts in a 0.9V-voltage supply. During operation, the power ic is supplied with a voltage of 1. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 6. 6 pins are on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 400mV. This IC power should be powered by no more than 3.3V volts of supply voltage (Vsup). Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~85°C TJ. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 1.2μA. For similar manage ics search of the manufacturer, you can always refer to TPS3110E09, the base PMIC number.
TPS3110E09DBVTG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 400mV
1.2μA operating supply current
TPS3110E09DBVTG4 Applications
There are a lot of Texas Instruments TPS3110E09DBVTG4 Voltage Supervisors applications.
- Consumer electronics
- Embedded computing
- Set top box
- Battery cars
- Unattended substation automation
- Electric heating appliances
- DSP
- Detection of phase loss
- Household appliances
- WiFi router
