TPS3125J12DBVR Overview

This power management consists of 5 mounting terminals on which it can be mounted. A Tape & Reel (TR) package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 1.2V supply voltages. A supply voltage of 1 is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. This power ic can be sub-categorized as Power Management Circuits. In total, it has 5 pins on IC management. Power managment ic pin count is 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 750mV, which is the minimum supply voltage that should be applied. There should be no more than 3.3V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For this power management, there is an 14μA volt supply current. Supervisors are also additional features, such as [0] for example, which are worth mentioning. It is always advisable to use TPS3125J12, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature that PMIC chip can work with is 25μA.

TPS3125J12DBVR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 750mV
14μA operating supply current

TPS3125J12DBVR Applications

There are a lot of Texas Instruments TPS3125J12DBVR Voltage Supervisors applications.

• Household appliances
• Medical-specific isolation transformer
• Smart meter
• FPGA design
• Electrical fire monitoring system
• Detection of phase loss
• Automotive power systems
• Magnetic resonance imaging
• DC stabilized power supply module
• Kitchen appliances