TPS3126E15DBVT Overview

Power management is mounted through 5 terminals. In terms of packaging, power management follows the Cut Tape (CT) model. To assist you, this IC power includes 1 functions. Power management consists of 1 channels, each of which can be used independently. IC management is packaged as a SC-74A, SOT-753 package. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 1.5V. When 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. 5 pins are present in total in this power management. Pin count of the power management is 5. Supply voltage (Vsup) should be at least 750mV for this power management. In this PMIC, the maximum supply voltage (Vsup) should not exceed 3.3V volts. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. Supplied with a operating current of 14μA, this PMIC is capable of fully function as specified. Power management is also possible to add other features such as MANUAL RESET INPUT; POWER-ON RESET GENERATOR to name a few. You can always use TPS3126E15, the base supervisor number, to search for similar PMICs of the manufacturer. At most, voltage supervisor can operate at a supply temperature of 25μA.

TPS3126E15DBVT Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 750mV
14μA operating supply current

TPS3126E15DBVT Applications

There are a lot of Texas Instruments TPS3126E15DBVT Voltage Supervisors applications.

• Leakage protection
• Battery-powered equipment
• Functional modules
• Computer applications
• Important electronics for automotive safety
• Detection of phase loss
• Kitchen appliances
• Electrical fire monitoring system
• Leakage current detection
• Power distribution systems of operating room