TPS3305-33DG4 Overview

A total of 8 terminals are used to mount this power management. In terms of packaging, power management follows the Tube model. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 2 channels. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 5V. During operation, the power ic is supplied with a voltage of 2. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 8. Pin count of the power management is 8. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2.7V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 6V volts in this IC management. The recommended mounting type is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~85°C TJ. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The supply current of the power management is 15μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. It is always advisable to use TPS3305, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature that PMIC chip can work with is 40μA.

TPS3305-33DG4 Features

Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
15μA operating supply current

TPS3305-33DG4 Applications

There are a lot of Texas Instruments TPS3305-33DG4 Voltage Supervisors applications.

• DVR
• Insulation fault location system
• WiFi router
• Battery cars
• Data storage applications
• Low voltage/high power - AI, GPU
• Telecommunications equipment
• Power distribution systems of ICU
• Electric heating appliances
• Detection of phase imbalance