TPS3306-15DGKG4 Overview

This power management consists of 8 mounting terminals on which it can be mounted. Packaged in a Tube-shape, IC management comes with a number of features. In this IC power you will find 1 functions for you to refer to. There are a total of 2 channels on this supervisor, and they are arranged in a series. In this PMIC, you can find 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions for your reference. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 3.3V supply voltages. In a 2 supply voltage, the PMIC chip conducts. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 8 pins on IC management. Power managment ic pin count is 8. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2.7V. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 15μA. There are other features such as POWER-ON RESET GENERATOR to name a few. It is always advisable to use TPS3306, the base supervisor number, when searching for similar PMICs from the manufacturer. There is a requirement for 3/5V power to power this power management. The maximum supply temperature is 40μA.

TPS3306-15DGKG4 Features

Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
15μA operating supply current

TPS3306-15DGKG4 Applications

There are a lot of Texas Instruments TPS3306-15DGKG4 Voltage Supervisors applications.

• Low voltage/high power - AI, GPU
• Important electronics for automotive protection
• Network equipment
• Utility meter
• Microcontroller system
• Battery cars
• Leakage protection
• Telecommunications equipment
• DSP
• Dash board