TPS3600D50PWRG4 Overview
It is mounted through 14 terminals on the power management. Packaging is in the form of a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find 14-TSSOP (0.173, 4.40mm Width) functions for your reference. There are a lot of similarities between this IC management and other Battery Backup Circuit products. When a supply voltage of 5V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Using Surface Mount, IC management is mounted. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 14 pins on IC management. Power managment ic pin count is 14. There should be a minimum voltage supply (Vsup) of 1.65V for this PMIC. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount mounting is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The supervisor's supply current is specified to 20μA. You can always use TPS3600D50, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 40μA can be used with this power management.
TPS3600D50PWRG4 Features
Battery Backup Circuit type
Minimum supply voltage of 1.65V
20μA operating supply current
TPS3600D50PWRG4 Applications
There are a lot of Texas Instruments TPS3600D50PWRG4 Voltage Supervisors applications.
- Household appliances
- emergency room
- Unattended substation automation
- Display equipment
- Detection of phase loss
- Microprocessor system
- Fire equipment power monitoring system
- Detection of phase sequence
- Telecommunications equipment
- Satellite navigation
